Velleman DPF2 Manual Del Usuario página 5

•
Use the Save, SaveAll, (select) All and Delete buttons to save and delete the images in
the photo frame area [3].
•
Use the Exit button to close the application. A warning is given when the images are not
downloaded to the photo frame yet.
•
Remove the photo frame from the USB port in the appropriate way depending on the
computer system and remove the USB cable from the photo frame.
MAIN MENU
USB CONNECTED
CLOCK
SLIDE SHOW
AUTO SHUTDOWN
CONTRAST
BACKLIGHT
DELETE
OFF
EXIT
•
To show the current time on the display, press and hold the up [E] or down [D] button
for ±3s. To remove it, press again for ±3s.
•
To charge the photo frame, connect the USB cable to the USB port [B] and the other end
to a powered USB port. Charging time: ±2h. Do not charge more than 12h. A small
battery icon is displayed indicating the charging process.
•
To reset the photo frame to factory settings, use a small pin to gently press on the reset
button [G].
17/12/2008
YES
NO
DISPLAY CLOCK
ANALOG CLOCK
SET CLOCK
CANCEL
ON
OFF
CANCEL
ON
OFF
CANCEL
set the LCD contrast
set the backlight
DELETE ONE
DELETE ALL
CANCEL
switch off the photo frame
return to normal operation
DPF2
set to 'yes' when connected to a PC
set to 'no' when charging
display digital clock
display analogue clock
set the clock: year-day-month-hh-mm-ss
return to main menu
set delay time between photos (seconds)
disable slide show
return to main menu
set the auto power off time (minutes)
auto power off disabled
return to main menu
range 01~06
range 01~21
YES – NO - CANCEL
YES – NO – CANCEL
return to main menu
5
®
Components nv
©Velleman