Publicidad
Idiomas disponibles
Idiomas disponibles
Step 5 – Once the blade is adjusted to zero gap or
your liking, gently tighten the two screws on each
side of the blade while holding the zero gap tool in
place. If the blade is not adjusted to satisfaction
after testing, repeat the adjusting process.
DISPOSAL OF LITHIUM ION BATTERY
This trimmer has a lithium ion battery. To protect the environment, these batteries
should be removed and properly disposed of when the unit is no longer operating. To
remove the battery block for disposal or recovery, follow these instructions:
1. Disconnect the trimmer from household outlet.
2. Discharge the battery pack completely before removing.
3. Remove the 2 screws in the bottom housing cap. Remove the cap and slide the
handle off the unit.
4. Remove the BaBylissPRO name plate using a small flat screwdriver. Proceed to
remove the 2 screws located under the name plate and the 2 screws towards the
base of the housing.
5. Open the trimmer and remove the battery using wire cutters.
6. To protect the environment, do not dispose of your battery with your ordinary
household waste. For more details on recovery of material and waste-treatment
facilities, please contact the waste disposal services in your region.
FX787GBPUZ IB-22_078.indd 9-10
FX787GBPUZ IB-22_078.indd 9-10
T-blade
Trimmer
PRODUCT FEATURES
1. Zero Gap T-Blade
Cleaning brush
2. Brushless Motor - 7200 rpm
Blade guard
3. Power adapter
4. LED charge indicator light
Lubricating oil
Screwdriver
Zero gap tool
Adapter
Model No.: C045120-EU
Input: 100-240V ~ 50-60Hz 0.2A Max
Output: 4.5V
1.2A 5.4W
a. LED BLUE Blinking - Charging
b. LED BLUE - Fully Charged
c. LED BLUE Flashing - 10 minutes battery left
2022/4/13 3:57 PM
2022/4/13 3:57 PM
Publicidad
