HAMPTON BAY 92380 Guía De Uso Y Cuidado página 7

Assembly - Standard Ceiling Mount
1
Preparing for mounting
□
Remove the canopy bottom cover (JJ) from the canopy (C) by
turning the bottom cover counter clockwise until it unlocks.
□
Loosen the two canopy screws (SS) located in the bottom of
the slide-on mounting bracket (A).
□
Turn the slide-on mounting bracket (A) counterclockwise and
lift it up to remove the slide-on mounting bracket from the
canopy (C).
2
Routing the wires
NOTE: The fan comes with 8 in. lead wires for use with
the provided 6 in. ball downrod assembly (B). If you wish
to use a longer downrod, attach the 3-pin extension wire
(K) and 2-pin extension wire (L) to the fan by connecting
the molded adaptor plugs from the extension wires to the
3-pin and 2-pin adaptor plugs from the fan.
□
Route the wires exiting the top of the fan motor assembly (E)
through the decorative motor collar cover (D) and then the center
of the canopy bottom cover (JJ).
□
Make sure the opening of canopy (C) is on top and insert the ball/
downrod (B) through the canopy (C).
□
Route the wires exiting the top of the fan motor assembly (E)
through the downrod as shown.
SS
7
Please contact 1-877-592-5233 for further assistance.
A
C
JJ
C
JJ
D
B
E
HOMEDEPOT.COM/HUBSPACE