Descargar Imprimir esta página

Stihl RMA 460.0 V Manual De Instrucciones página 22

Publicidad

Idiomas disponibles

Idiomas disponibles

English
► Hold handlebar (3) and control bar for mowing (2) with the
right hand so that the thumb encloses handlebar (3).
11.2 Deactivating the Blade
► Release the control bar for mowing.
► Wait until the blade is no longer turning.
► If the blade continues to turn: pull out the activation key,
remove the battery and consult a STIHL specialist dealer.
The lawn mower is defective.
12 Switching the Drive On and Off
12.1 Switching On Drive
The mower's speed is infinitely variable between 1 km/h and
4.5 km/h. The mower travels at top speed in position
mower travels at the lowest speed in position
The selected speed affects the battery's runtime. The lower
the speed, the longer the battery's runtime.
► Place the mower on a flat surface.
1
► Pull the drive's switch lever (1) up to the handle (2) and
hold it so that your thumb is wrapped around the handle
(2).
The mower begins to move forwards.
► Set the lever (3) to the required position.
20
. The
.
2
3
3
12.2 Deactivating Drive System
► Release the control bar for self-propulsion.
► Wait until the mower comes to a standstill.
► If the mower does not stop: Pull out the activation key,
remove the battery and consult a STIHL specialist dealer
for assistance.
There is a malfunction in the mower.
13 Checking the Lawn Mower and Battery
13.1 Checking the Controls
Lockout button and switch lever for blade drive
► Pull out the activation key.
► Remove the battery.
► Depress the lockout button and release it again.
► Pull the switch lever for blade drive fully in direction of
handle and release it again.
► If the lockout button or switch lever for blade drive is stiff
or does not spring back to the idle position: Do not use
your mower and contact your STIHL servicing dealer for
assistance.
There is a malfunction in the lockout button or switch
lever.
Switch lever for wheel drive
► Pull out the activation key.
► Remove the battery.
► Pull the switch lever for wheel drive fully in direction of
handle and release it again.
► If the switch lever for wheel drive is stiff or does not spring
back to its idle position: Do not use your mower and
contact your STIHL servicing dealer for assistance.
There is a malfunction in the switch lever for wheel drive.
Lever
► Pull out the activation key.
► Remove the battery.
12 Switching the Drive On and Off
0458-818-9921-A

Publicidad

loading