Twister be cool Manual Del Usuario página 59

Step 3: Open the buckle and turn up the fabric cover
of headrest from the bottom, open the middle fabric
cover of the seat body, assemble the shoulder straps
and two metal buckle connectors along with two
inner sides of the plastic part of seat body, put two
metal buckle connectors in two storages of inner
plastic part of seat body and close two storages.
Close the middle fabric cover of the seat body and
turn down the fabric cover of headrest to the bottom.
Now the shoulder straps and two metal buckle
connectors are concealed between the plastic part of
seat body and the fabric covers.
Step 4: Remove the crotch pad, slide the rest part of
the buckle and the crotch strap, make them both
underneath the fabric cover of seat body, open the
cover of buckle storage of seat body ,assemble the
rest part of the buckle and the crotch strap properly,
then put the rest part of the buckle and the crotch
strap in the storage and close it finally.
Step 5: Adjust the enhanced child seat to recline
position 1, adjust the harness adjuster strap, now the
enhanced car seat can be used without harness for
your child (Child height 100-150cm ).
2.2 Changing the direction of travel
This enhanced child seat can be adjusted 360°
rotation. This enhanced child seat can be used:
Rearward Facing: Child height 40cm-105cm/ Child
weight≤19 kg;
Forward Facing: Child height 76cm-150cm
To change the direction of travel, pull the rotation
handle and turn the seat body to the desired direction
until it engages.
Important ! Before making any car journey, ensure
that the rotating part of the child safety seat is fully
engaged by trying to rotate the enhanced child seat in
both directions.
EN
59