Publicidad
1
Connect Left pole and Right poles by inserting
two imperfprated ends into a plastic connector.
3
Lace the poles by successivwly threading the
cotton string through the upper holes of all 4
combined poles.
5
Tighten them up, Then you stand in the tent
and insert the stabilizer (removing the upper
part) into the middle of the pole.
2
Slide the connected poles through fabric seams.
4
Spread out the poles to the full extent, and then
the tent is stably installed.
6
Insert and tighten the upper end of the fixator
www.robin-cool.com
Publicidad
