Publicidad
Idiomas disponibles
Idiomas disponibles
Do not expose the appliance to high temperatures and do
not bring it closer to heat sources.
Never leave the appliance unattended while it is running.
ATTENTION: This appliance contains a UV ray
emitter. Do not stare at the light source.
It is recommended not to concentrate cleaning, using the
UV lamp, on a single point to avoid damage to the object
being cleaned.
Always use the button to turn on or turn off the cleaner.
In case of overheating, if the unit produces smoke, smell
or unusual noises, turn it off immediately and check that
the pipe is free from obstacles. If the tube is free, contact
the service center for fixing it.
To avoid serious damage, do not walk on the power cord.
Disconnect
immediately after use. Additionally it is advisable to wind
the power cord in order to ensure a better cleaning and to
avoid any risk of damage.
Do not immerse the motor unit in water or other liquids,
clean it with a damp cloth only. Frequently clean the dust
container and the premotor filter.
Do not use the appliance if the dust bin is not installed.
Use only on dry surfaces.
CAUTION: while the unit is running, do not
approach the air inlet to ears, eyes, etc., or to
fragile items such as vases, tools, electronic machines.
DESCRIPTION AP21
1. On/Off button
5. Back wheels
9. Suction hole
ASSEMBLY
Remove the dust container.
Rotate the container (4) anti-clockwise and pull to extract it from motor housing.
Install the dust container
Match the square hole present on the container (4) with the hole present on the motor housing (3).
Insert the pin on the motor body into the joint on the container. Rotate the container clockwise until lock.
the
plug
2. Handle
6. Screws for lamp unlock
10. Front wheels
from
the
3. Motor housing
7. Power cord
11. Vibrating pads
electrical
4. Dust container
8. UV lamp
outlet
11
Publicidad
