• Aromas containing oil (e.g. euca
GB
lyptus oil) must not be used as
these may damage the device.
Use only watersoluble aromas.
• Do not transport the device
with a filled water tank.
• Do not operate the device if it
contains very little or no liquid.
• The device must be emptied
and cleaned before storage.
The device must be cleaned
before the next use.
A. Start-up Operation
Fill the device only while the
power supply unit is disconnected!
1. Remove the upper part.
2. Fill with distilled water up to
the maximum water level indi
cator (100 ml).
3. Add 1 to 2 drops SOEHNLE
fragrance oil.
4. Reattach upper part correctly.
5. Connect power supply unit.
6. Place on a level surface.
7. Switch on. The switch is loca
ted in one of the feet. Place
hand on the device and press
in the direction of the switch.
8
B. Cleaning
WARNING: It should be noted
that high humidity can promote
the growth of microorganisms
in the environment. Micro
organisms that may be in the
water or in the environment
where the unit is used or stored
may grow in the water tank and
be blown into the air. This can
lead to serious health risks if
the water is not
renewed and the
water tank is not
properly cleaned
every 3 days.
Clean the water tank every 3 days
Before cleaning, dis connect the
unit from the mains.
1. Remove remaining water. Do
not use ventilation opening!
2. Any buildup, deposits or dirt
film formed on the surfaces of
the water tank or internal sur
faces must be removed.
3. All surfaces shall be wiped
dry. Wipe out the water reser
voir with a cloth and cotton
swab.
4. Do not use abrasive or corro
sive cleaning agents.