Start-up
Please clean all the parts as described in the section "Cleaning and Care" before these come into
contact with food.
▪ Carefully remove the protective cover from the stainless steel blade (4) and place the stainless steel
blade (4) into the slot at the bottom of the container (5). If necessary, twist the stainless blade (4)
slightly until it slides downwards.
Caution: The blade is sharp. For this reason, always attach the protective cover when not working
with the blade.
▪ Insert the food, cover the container (5) with the splash guard (3). Insert the food into the con-
tainer (5) but not past the MAX mark.
▪ Attach the drive unit (2) and turn this until it locks into the splash guard (3).
After inserting the mains plug, press down the desired start button (1) several times in short bursts
until the desired results are achieved.
▪ You must wait until the stainless steel blade (4) has come to a standstill before removing the
protective cover (3).
Safety function
The processor's motor will only start when the drive unit (2) is correctly fitted. Do not remove the drive
unit (2) while the device is operating.
10
Cleaning and Care
Remove the mains plug after use. Never immerse the drive unit (2) in water, simply wipe it with a
damp cloth. Do not use any abrasive cleaning agents. Take care when cleaning that you do not injure
yourself on the sharp blade (4). Food residues could get into the blade slot. Remove this after each use.
Dishwasher safe
Drive unit (2)
Splash guard (3)
Stainless steel blade (4)
Glass container (5)
Can be rinsed
Wipe with a
under running
damp cloth
water
11