Maintenance & Cleaning - INVENTOR NAM-ION200 Manual Del Propietário

Lock
Press the "FAN" and "TIMER" buttons simultaneously for one second to activate the lock
function. The "Lock" indicator illuminates. Press the buttons again, to turn off the lock function.
• When the air purifier is under "Lock" mode, you are not able to activate any other
function.
7. MAINTENANCE & CLEANING
Before performing any maintenance or cleaning of the air purifier, make sure the device is
unplugged.
FILTER CLEANING & REPLACEMENT:
l
The Filter Cleaning Indicator will flash in order to remind you that your purifier's filter needs
to be cleaned. Use soft brushes or cloth to clean the air purifier.
• Do not use water or abrasive cleaning agents or solvents for cleaning.
• Do not use a dishwasher to clean the filter.
• Do not apply any water directly on or into the device while cleaning, as it may cause
rust, insulation deterioration or electrical shock.
• Re-position the filter. Press "ION" button for 3 seconds, the timer resets from the beginning.
• If this unit is operated in an area of heavy tobacco smoke, barbeque's etc., within
a small period of time (a few weeks or months) the filter may produce an odor, due
to its absorbing capabilities. It is recommended to check the filter every 2- 5 days.
If the odor persists kindly replace the filter.
10
The air filter should
be checked and
cleaned
20
every days
EN