Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT SPECIFICATIONS
The pressure washer being used MUST be compatible with the below
specifications to ensure proper operation.
• 1/4"
Quick Connect spray wand plug
• 4,000 Maximum PSI
• 1,500 Minimum PSI
• 3.0
Maximum GPM
• 2.0
Minimum GPM
• Cold water pressure washers only
• (Changing nozzles will alter the min and maxes, see NOZZLE CHART)
SAFETY
• ALWAYS review and know all the warnings and safety alerts for the
pressure washer that you are using that can be found in the pressure
washer manual.
• ALWAYS be aware of where the Whirl-A-Way is being used or pointed.
High-pressure spray can cause injury or damage.
• If this type of injury occurs, DO NOT TREAT AS A SIMPLE CUT. SEEK
EMERGENCY MEDICAL ATTENTION IMMEDIATELY. If you are using
cleaning detergents, be prepared to tell the physician exactly what
kind.
• Spray guns can have significant kickback. ALWAYS brace yourself and
have firm footing when operating.
• NEVER attempt to repair high-pressure components if damaged.
Always replace parts.
• ALWAYS use on flat surfaces.
• WARNING: Hitting any raised obstacle with the surface cleaner can
cause damage. If performance changes, or if it begins to vibrate after
impact, immediately turn off the pressure washer. Inspect for damages
and make repairs.
• ALWAYS ensure all component connections and fittings are securely
fastened. High-pressure water can turn loose fittings or spray nozzles
into projectiles causing injury or damage.
• CAUTION: If stones or debris collect in the whirl-a-way they can be
cleared by tilting it in safe direction to flush away the debris.
• ONLY use cold water pressure washers. Hot water pressure washers
will cause failures and will void warranty.
• ALWAYS be aware of surfaces that will become wet and may become
slippery.
• ALWAYS wear appropriate personal safety equipment. Eye protection
is especially important.
• NEVER use without wearing foot protection.
• ALWAYS have a secure grip of the gun and stable footing.
• NEVER modify the Whirl-A-Way in any manner.
• NEVER reach under the Whirl-A-Way while it is operating.
• ALWAYS test in a safe location when first using.
4
PRODUCT SPECIFICATIONS AND SAFETY
Publicidad
