PNI Safe House PG07 Manual De Usuario página 2

EN
SPECIFICATIONS
• Power supply: 3V, 2 x AAA batteries
• Current: ≤ 160mA (in alarm state)
• WiFi standard: 802.11b/g/n
• Wireless communication frequency: 433MHz
• Radio transmission power: 10 mW
• Alarm distance between sensor and magnet: ≥15 mm
• Working temperature: -26°C ~ 80°C
BASIC INSTRUCTIONS
Connecting to the WiFi network
1. Push up the bracket on the back of the sensor and install the batteries in the dedicated slot.
2. Search the Google Play or App Store for Tuya Smart or scan the code below. Open the
application after installation and register.
3. In the main interface of the application, press "Add device" or "+" in the upper right corner
4. From the list of devices, select "Sensors" → "Contact sensor (Wi-Fi)"
5. Select the WiFi network you want to connect to and add the network password.
6. With the help of a sharp object, reset the sensor, holding down the Reset button for 5 seconds.
7. The led indicator on the sensor flashes to indicate that it has entered connection mode. In the
application, press "Confirm the indicator is blinking", then "Blink quickly".
8. Wait for the sensor to connect.
After successfully adding the sensor to the application, test it by opening and closing the door or
window. You will immediately receive an alarm notification in the application.
2
Android iOS
User manual