Publicidad
Idiomas disponibles
Idiomas disponibles
Do not use accessories on this machine except those recommended by our company as their
use could cause severe damage to the user, people close to the machine and the machine
itself .
Clamping the
and guiding.
machine
While working, always hold the hoe firmly with both hands on the handles.
Attention! Do not use the hoe with one hand.
Attention! The motor hoe may bounce upwards or jump forward unexpectedly, if the teeth hit
with something hard that is buried such as large stones, roots or trunks. , if the soil is very hard
or if the ground is frozen. Always hold the hoe firmly with both hands.
Work with the hoes.
Use this machine exclusively for aerating ground areas or weeding. Do not use this machine to
work in public spaces or to perform professional work in agriculture.
Before starting to work with the machine, check that the milling cutters are not in contact with any
object and can be moved freely.
Aeration of the earth.
This machine can remove soil for easy aeration.
To aerate the earth:
1. Put the hoe in the work area.
2. Adjust the height of the depth spur to the desired working height.
3. Start the hoe.
4. Accelerate the engine and the milling cutters will start spinning
5. Lightly press the motor hoe to nail the deep spur. The more pressure the
Motohoe will move slower and go deeper.
6. Keep a proper rhythm so that the strawberries have time to crumble the soil.
Tips for use.
The
moving milling cutters will pull the machine forward, if you counteract by nailing more the
spur of the motor hoe the strawberries will penetrate more into
the ground. If the motor hoe
sinks and does not move forward, lift the handlebar so that the spur does not dig into the ground
and move the handlebar right and left until it is released.
When working on
slopes, always position yourself a little higher than the slope so that the
machine is always below you.
110
Publicidad
