RS Pro RS-191A Manual De Instrucciones página 3

Temperature and Humidity data logger / English
3-Simple start:
1. Check the battery indicator is normal.
2. Connect the USB data logger to the Windows PC. The first time using, according to the
computer instructions, install the system's own driver. Similar to A new U disk.
3. Setting the data logger. Please check the software CD, use the PC software setting the
data logger. For more information, please refer to the PC software help document.
4. Recording and download data.
First step: Open the software. Then open the setting window.
Second step: refer to the picture.
*Logger Name will synchronize to the
PDF reports.
*Enable high and low alarm parameter will synchronize to the PDF reports.
2
Temperature and Humidity data logger / English
Third step:
After Setting
"Manual" mode
Waiting start
Fourth step: After recording some data, you can use the PC software download data.
Sample rate is 1minute, 10 minutes is ten data.
4-Sample rate & Record time
Sample rate/ min Record time/ day
1 13.9
2 27.8
3 41.7
4 55.6
5 69.5
6 83.4
7 97.3
Long Press
Recording
Sample rate/ min Record time/ day
8 111.2
9 125.1
10 139.0
15 208.4
20 277.9
25 347.4
27 375.2
3