Publicidad
S 6 5 5 S M A RT A DJ U S TA B L E B E D B A S E
How to Assemble
Part 2: Add Legs (Optional)
Skip adding legs if you prefer to place your base directly on a platform, bed frame, or the floor.
1.
Locate leg placement locations.
2.
Hand screw all legs into the bed frame until secure (do not over tighten).
3.
Use the optional extension pieces for extra height.
4.
Ensure the bottom of each leg has an end cap attached.
Part 3: Connect the Cords
With the underside of the base still visible, locate the Power Supply Cord (attached to control box), Wall Plug Cord,
1.
and Power Supply Box.
2.
Connect the Power Supply Cord to the Power Supply Box.
3.
Connect the Wall Plug Cord to the Power Supply Box.
Note: Your cords are now connected but should not be plugged into an outlet until setup is complete.
5
2: 2
3: 1
2: 4
Power Supply Cord
Control Box
Wall Plug Cord
Power Supply Box
6
Publicidad
