Cuff Loose Indicator; Power Off; Last 3 Tests Average; Memory Check - LOGIKODIGIT DM590 Manual De Instrucciones

15
ENGLISH

12.6.1 Cuff loose indicator

When starting the measurement, " "will be displayed when the cuff is properly wound.
When the cuff is too loose," "will be displayed. At this time, please wear the cuff correctly and start
measuring again.

12.7 Power off

The " START/STOP " button can be pressed to turn off the unit in any mode. The unit can turn off the
power itself about 3 minutes no operation in any mode.
Safety Precaution: If pressure in arm cuff becomes too extreme while testing, press the " START/STOP "
button to turn power off. The cuff pressure will rapidly dissipate once the unit is off.

12.8 Last 3 tests average

With the power off, press the " MEM " button to activate the screen. After self-diagnosis, the screen will
display the average of the last 3 readings of the last group used. The " AVG " symbol will appear together
with the corresponding WHO/WHO classification indicator.
To check the average results of other groups, select the desired group before activating the " MEM "
button. (see "Select memory group")
DM590 DM591 DM592S/DM592P

12.9 Memory check

You may check past test results by using the "MEM" button. The most recent test result and oldest test
result in memory can be viewed by pressing and holding the "MEM" button. Upon activating test results.
you can press the "MEM" button to scroll through all test results stored in memory. To check the average
results from other groups, please select desired group first.
DM590 DM591 DM592S/DM592P

12.10 Memory deletion

Memory for a selected group may be deleted while in Memory Check mode. Press and hold " SET " ("
", "Group1/Group2") button for approximately 3 seconds to delete all memory records from the
selected group with voice broadcast "Memory Clear" and then transfer into testing mode. Press the
"START/STOP " button to turn the unit off.
Note: Memory cannot be recovered once it has been deleted.