Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS MANUAL
IMPORTANT
Read the instructions carefully before using this product and keep them
if necessary.
User: If you are unable to read or understand any warnings, precautions or
instructions, please contact your health care pro-fessional or distributor
before using this product or risk and damage may result.
Consult your doctor or health care professional before using a technical
aid.
Distributor: this leaflet must be given to the users of this product.
PRODUCT DESTINATION
Compact bedside tables are medical devices. These products allow the
user to read or eat in bed or in a chair. They are adjustable in height and
tilt to adapt to the needs of the user during the day.
PRODUCT DESCRIPTION
SAFETY PRECAUTIONS
Failure to observe the precautions for use may result in the risk
of serious injury.
•
Use the bedside table only as described in this manual.
•
Install the bed table on a flat surface.
•
Store the bedside table in an indoor environment, away from moisture
and dust.
•
This bedside table uses a high-pressure pneumatic cylinder to adjust
the height of the bed top. Do not remove the locking pin from the
column assembly before use.
•
Before use, make sure that all parts are present and in good condition.
In case of damage, please contact your dealer.
•
Carefully follow the assembly instructions and ensure that all
components are properly secured before use.
•
If any parts are damaged, broken or worn, contact your dealer.
NOT-AD-03 – NOVEMBRE 2020 (VERSION 1.0)
EN
MOUNTING
INSTALLATION
Place the bedside table on a clear surface and remove the packaging. Do
not throw away the packaging before the assembly is completed.
STEP 1
•
Place the table upside down
on a flat surface as shown on
the right.
•
Insert the leg frame into the table
top frame, aligning the screw
holes as shown on the right.
•
Insert the hexagon socket screws
through the frame into the table
top frame.
•
Use the M8 hexagonal key to
tighten the bolts.
STEP 3
•
Turn the table over and place it on the floor. Make sure that all the
pieces are tightly fastened before using the bed table.
•
Remove the locking pin from the frame.
STEP 2
•
Place the base upside down over
the frame as shown on the left.
•
Screw the 3 screws through
the base.
4
Publicidad
