Publicidad
Idiomas disponibles
Idiomas disponibles
Propane Cylinder Installation/Removal
Propane Cylinder Installation:
1. Remove cap from end of Propane cylinder (sold separately).
2. Cap should be kept on cylinder when not in use to prevent dirt and debris from
entering Regulator/Valve.
3. Check end of cylinder attachment for dirt and debris. Clean out if necessary.
4. Insert threaded end of Propane Cylinder into
Regulator/Valve and hand-tighten turning cylinder
clockwise as shown below. DO NOT USE TOOLS!
Over tightening can damage threads on Regulator/
Valve.
5. Perform a leak test.
Propane Cylinder Removal:
1. Turn regulator OFF.
2. Allow Grill to cool.
3. Remove the propane cylinder by turning counter-
clockwise until disengaged from the Regulator/Valve.
4. Install cap on cylinder. Cap should be kept on cylinder when not in use to prevent
dirt and debris from entering Regulator/Valve.
Leak Testing (1lb. Disposable)
• During leak test, keep grill away from open flames or sparks and do not smoke.
Grill must be leak tested out doors in a well ventilated area.
• Leak test must be repeated each time gas cylinder is replaced or after storage.
Materials needed include clean paint brush and 50/50 soap and water solution.
Use mild soap and water. Do not use household cleaning agents. Damage to
components can result.
1. Be sure control knob on regulator is in "OFF" position.
2. Brush soapy solution onto connection between gas cylinder and regulator at (A).
If growing bubbles appear, there is a leak. Retighten connection and repeat steps
1 and 2.
If you can not stop a leak, remove gas cylinder
from regulator and check for damaged threads,
dirt and debris on regulator and gas cylinder.
A
Also check to see if anything is obstructing flow
of gas at regulator and gas cylinder openings.
Remove any obstruction that may be found and
repeat leak test. If threads are damaged on
either regulator or gas cylinder, replace.
Order new parts by giving the serial, model
number and name of items needed to the Grill
Service Center at 1-800-232-3398.
USE AND CARE
For Use With 20lb LP Cylinder
Pa g e 5
WARNING
12"
0.3m
C H A R B R O I L. C O M
Publicidad
