Descargar Imprimir esta página

Trilux LMS WW Manual De Instrucciones Y De Instalación página 19

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 60
E
Scene buttons
These buttons call or save scenes.
The appropriate scene is called by briefly pressing the corresponding button. If the
system is switched on, it switches to manual mode and the saved brightness and
colour temperature are set. If the system is switched off, the system switches on (to
manual mode) and immediately sets the saved brightness and colour temperature.
By pressing and holding the button (approx. 3s) the momentary brightness and colour
temperature of the system is saved in the corresponding scene. Saving of a scene is
indicated with flashing two times of the MANUAL/AUTO LED. If after saving a scene
the system is in automatic mode, it switches automatically to manual mode.
Slider for brightness
Set the brightness of the system with this slider. If the system is in OFF mode, the
system switches on (manual mode, selected slider brightness, switch-on colour
temperature, standard is neutral).
If the system is in automatic mode, the system switches to manual mode (selected
slider brightness, colour temperature is adopted from the automatic mode).
Slider for colour temperature
Set the colour temperature of the system with this slider.
If the system is in OFF mode, the system switches on (manual mode, selected slider
colour temperature, switch-on brightness, standard is 100%).
If the system is in automatic mode, the system switches to manual mode (selected
slider colour temperature, brightness is adopted from the automatic mode).
Button for AUTO / MANUAL
Alternate between automatic mode and manual mode with this button. The red LED
lights up if the system is in automatic mode. If you switch from AUTO to MANUAL,
previous values for brightness and colour temperature of the circadian curve are
adopted.
If you switch from MANUAL to AUTO, the daytime-dependent values for brightness
and colour temperature of the circadian curve are immediately output, and updated
once per second. If the system is in OFF mode, the system immediately switches to
automatic mode (output of circadian curve).
19

Publicidad

loading