Publicidad
Idiomas disponibles
Idiomas disponibles
appliance running continuously for more than one minute,
then make at least 5 minutes rest. Do not use the product
without food.
Do not insert your fingers inside the bowl while the mixer
is running.
Before operating the appliance, check that all the parts are
correctly installed.Never leave the appliance unattended
while it is running.
CAUTION! Unplug the unit from the socket before
touching the blades for any reason, such as cleaning
or foods removing.
CAUTION! Always unplug the unit from the electrical
outlet each after use and/or before touching the
blades and/or before installing or removing any
accessory or attachment.
To clean the immersion cone and the accessories, it is
recommended using warm tap water and containing the
use of detergents. When gleaning with detergents, rinse
thoroughly.
Do not immerse the top of the mixer in water or other
liquids, clean it with a damp cloth.
PARTS MX16
1. Low speed switch
4. Chopper's lid
7. Hand blender
OPERATING
IMMERSION SHAFT
-
Assemble motor housing (3) to the immersion shaft (7) routing the shaft counterclockwise
-
Insert the mixer in the bowl with the food to blend (ensure to immerse the entire blade to avoid any
splashing).
-
Press the button (1 or 2) to start operating. For best results, follow the instructions in "Setting processing
speed" section.
CAUTION! Do not insert your fingers inside the bowl containing food
-
Unplug the hand blender from the electrical outlet, once finished working,
This appliance is not suitable for chopping hard foods or ice. It is suitable for making baby food, milk shakes,
sauces, juices, cocktails, soups, vegetable soup, etc. ...
When processing fruits or vegetables, add also a small quantity of water to allow the device to operate in a
homogeneous way.
2. High speed switch
5. Chopper's container
8. Whisk
3. Main body
6. Chopper's blades
9. Cup
10
Publicidad
