Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL CODE 80300 REV 0
Level switch for
liquid detection.
He at er
Level switch inhibits the
thermostat operation if no liquid
level is detected.
Fig 7.1. Fixing clamp
J
.P. SELECTA s.a.
5. Equipment Description
Inmersión thermostats are wide used on laboratories for therma treatement of
samples, or heating/cooling other equipement.
The
The unit includes a water circulation pump to improve temperature distribution
into the bath, and faster heating.
Unit could work in a continuous or timed operation.
6. Installation
Unpack the equipment and visually check that the contents are in good conditions.
Keep the package for some days.
6.1 Location, Liquid tank.
A bucket or tank will be nedded to operate the thermostate. See ICC product
range on the cataloge.
Place the equipment on a flat level stable surface, suitable for the equipment
Circulation
weight.
pump
To work in a comfortable way, please leave a free space of 50cm around the
equipment and a minimum of 20cm at the rear part.
6.2 Connection to the mains
Plug the equipment to a near socket suitable for the equipment power. Use the
connection cable supplied or a similar one.
For your safety, the equipment must be earthed.
Before plugging the machine, check that the voltage supply and the frequency
match to the one indicated in the equipment plate.
7. Operation
All the equipment functions are set with the two push buttons placed on the
panel. Gently press with your finger in the center of each icon.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
Feb/2015
(It can be modified without notice)
Page: 6
Tel 34 937 700 877 Fax 34 937 702 362
Publicidad
