75%
100%
Error Indicators
There are 4 error indicators on the charger. They will light up
in red when corresponding situation happens. Refer to the
below table for more details.
Error
Meanings
Indicators
Reverse
connection/short
circuit
Bad battery
Charging overtime
Overtemperature
(> 120°C/248°F)
Charging Time
A number of factors will affect the time needed to fully
charge a battery. The size of the battery and the depth of
discharge are the obvious ones. Under the ideal conditions,
the estimated charging time is as below, but actual data
may vary with actual situations.
Flashes when the SoC is between 50-75%;
Becomes solid when the SoC reaches 75%.
Flashes when the SoC is between 75-100%;
Becomes solid when the battery is fully charged.
EN 14
Suggestions
Check if the clamps are
improperly connected or if
there is a short circuit.
Try activating the battery via
SUPPLY mode.
Check if the battery's capacity
is too large, or try charging
again.
Try again after the device's
temperature falls.