Edenwood 970495 Instrucciones De Uso página 16

B
Product usage
WARNING!
Before plugging in and switching on the unit, make sure that all the controls are
turned off or set to a low level.
The sound volume can be adjusted after the unit has been switched on.
The amplifier can only be used for one speaker. The other speakers connected
to the speaker must be amplified by their own amplifier or in some other way.
Connections
To connect a mixer or microphone to the unit, connect an XLR cable or a
6.35 mm jack cable to the MIC input.
To connect a CD player or turntable, connect an XLR or RCA cable to the
LINE IN input.
Other speakers can be connected via the LINE OUT output.
To connect an MP3 player or similar device, connect it via a USB cable and
plug this into the USB port.
To use an SD card, insert the card into the unit's SD port.
Once connected, turn on your various devices (microphone, mixer, etc.), then
press the POWER switch to turn on the speaker. The green light comes on.
Function buttons
When connecting an external device, use the buttons below to navigate and control your device.
Start/stop playback.
Press the MODE button to select the Bluetooth function.
Next track/Previous track.
Volume up/Volume down.
14 EN