Publicidad
Idiomas disponibles
Idiomas disponibles
Set width-to-height ratio
4:3 (standard)
y
16:9 (wide-screen format)
y
Step 3: Reception: Set number of
tuner modules
f
Set number of mounted tuner mo-
dules (DVB-S, DVB-T, DVB-C).
Step 4: Channelscan
f
Press button
to start automatic
OK
channelscan.
Step 5: Network
DHCP (Dynamic Host Configuration
Protocol) will assign automatically an
IP address and further network set-
tings to the ReelBox (e.g. from a router
or server in your network).
If you do not want to make use of
DHCP, then you need to manually
configure the network connection
of the ReelBox by the following
settings: IP address, network, gate-
way, nameserver, ReelBox name and
workgroup.
The IP address for gateway and
name server corresponds as a rule
to the IP address of your router.
Please use an address that has
not yet been used in the network
as the IP address of the ReelBox
(except those ending with 0, 1 or
255).
If there are problems, please
contact your network administra-
tor to get the appropriate data.
button.
Step 6: Software
The ReelBox is checking via online
connection a potential software update
and listing all software packages to be
updated.
Press button
„Upgrade" to up-
f
A
date all software packages.
f
In case you want to check your
entries once more or make some
changes, then you can return to the
individual installation steps by pres-
sing the button
.
B
Reboot ReelBox
After completing changes press
f
button
„Reboot ?" to reboot the
A
system.
f
After rebooting the system with all
settings for initial installation end
the installation wizard by pressing
button
.
C
The ReelBox is now ready for
operation.
GB
27
Publicidad
