Daspi ATIZA 1000N Manual De Usuario página 19

-the chain is tensioned up to the marks located at the ends of the shaft
3- THE DOOR STOPS IN THE MIDDLE OF THE ROUTE AND OPENS
-regulate the force by turning the potentiometer, clockwise, to the right to increase
and to the left to decrease.
4-THE DOOR DOES NOT MAKE ME A MANEUVER. STOPS IN THE MIDDLE OF THE PATH
-It is usually a failure of the transformer that feeds the panel, you must change it.
• The automation maneuvers are executed with the START button (1-2), by means of the
keypad or by means of a programmed command.
• The maneuver ends when the corresponding limit switch is activated.
• If an order is given during the opening or closing operation, the operation ends.
• The activation of the safety contact (safety 1) in the opening or closing maneuver, stops
the maneuver completely. (total stop)
• The activation of the safety contact (safety 2) in the closing maneuver implies its inversion,
causing the opening.
• The garage light contact is activated when the maneuver starts.
• The motor force regulation is applied through a potentiometer.
• Soft stop adjusts automatically.
ATIZA 1000N
FUNCTIONING
CONECCTIONS