Publicidad
Idiomas disponibles
Idiomas disponibles
COMPONENTS
1
Crimping jaw (L), JPT contacts
2
Crimping jaw (L1), JPT/MCP contacts
3
Release tool, JPT contacts
4
Release tool, MCP contacts
5
Crimping pliers
ATTENTION
Read the operating instructions and the safety information contained therein carefully before using the
product. Use the product correctly, with caution and only for the purpose for which it is intended.
Failure to observe the safety instructions can result in damage, injuries and void the warranty. Keep
these instructions in a safe, dry place for future reference. Include the operating instructions if you
pass the product on to third parties.
INTENDED USE
This tool set is used to repair connectors with Junior Power Timer (JPT) plug contacts, such as plugs
on the wiring of injection valves, radios, compressor couplings, temperature sensors, etc.
SAFETY INFORMATIONS
•
Keep children and other unauthorized persons out of the work area.
Do not let children play with the tool or its packaging
•
•
Use the tool only for its intended purpose.
•
Before starting work, make sure that the cable is de-energized to avoid a short circuit.
Make sure that the cable has a good electrical connection and a good strain relief.
•
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of throwing them away as waste. All packaging
materials are to be sorted, taken to a recycling center and disposed of in an
environmentally friendly manner. Check with your local waste authority about recycling
measures. At the end of its service life, dispose of this product in an environmentally
friendly manner.
RELEASE TOOLS
Junior Power Timer (JPT) connectors
BGS technic KG
Bandwirkerstr. 3
42929 Wermelskirchen
Crimping and Release Tool Set
Release tool for
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Release tool for
Multi Contact Point (MCP) connectors
www.bgstechnic.com
© BGS technic KG, Vervielfältigung und Weiterverwendung verboten
BGS 70929
Publicidad
