Publicidad
Once completed, the focus range will be limited between Point A and Point B. The yellow triangle
indicates the current focal position and can only move between the two limit points when
turning the focus knob.
• The limit points work in pairs. Once the first limit point is marked, the second limit point
needs to be marked within 30 seconds. Otherwise, the first limit point will disappear
automatically.
• If three limit points are marked, the first and second limit points will disappear
automatically once the fourth is marked.
Remove the Limit Points
Turn the focus knob to the limit point, and press the LIMIT button once to remove the limit point.
Press and hold the LIMIT button, and an on-screen prompt will appear to remove all the limit points.
Tap Confirm to remove all the limit points.
Focus Points
Mark the Focus Points
Turn the focus knob to the desired focus point, and press the MULTI button once to mark a focus
point (such as Point 1). A green triangle icon
A maximum of 20 focus points can be marked. When the focus knob is turned past a focus point
there is an obvious resistance.
Remove the Focus Points
Turn the focus knob to the focus point, and press the MULTI button once to remove the focus point.
Press and hold the MULTI button, and an on-screen prompt will appear to remove all the focus
points. Tap Confirm to remove all the focus points at once.
The DJI Three-Channel Follow Focus can memorize the marked limit points and focus
points. If the remote monitor and the follow focus are powered off normally, the marked limit
points and focus points will recover automatically when the remote monitor is powered on
again. If the remote monitor or the follow focus is powered off abnormally (the connection
between the remote monitor and the follow focus is lost due to insecure installation), the
marked limit points and focus points will be removed.
Iris Control
Push the slider forward and backward to adjust the iris of the lens. The iris parameter is viewed in
the upper right corner of the remote monitor.
Zoom Control
If the controlled device supports zoom (both the lens and the firmware of the recording device need
to support zoom), push the zoom stick forward and backward slightly to adjust zoom. The zoom
speed adjusts based on the pressure applied to the stick.
DJI Three-Channel Follow Focus
will show on the MF readings of the remote monitor.
User Guide
5
.
Publicidad
