RH423, RH429, RH439, RH449
5
Installation
!
CAUTION! Health hazard
To avoid a hazard due to instability of the device, it must be fixed in
accordance with the instructions.
A
NOTICE! Damage hazard
Do not use extension cords or ungrounded (two pin) adapters.
The minibar is designed for free-standing installation, but can be built-in if the follow-
ing conditions are kept to ensure satisfactory operation and maximum cooling effi-
ciency.
• The minibar must be leveled carefully to ensure proper function.
• The socket outlet for the mains connection must be freely accessible.
• The minibar must not be exposed to radiated heat (sunlight, radiator, oven).
5.1
Reversing the door
I
NOTE
For reversing the door, a different hinge is needed.
1. Disconnect the mains.
2. Lay down the minibar carefully on its back.
3. Proceed as shown (fig. 2, page 4 – fig. 5, page 4).
4. Check that the door closes easily and is sealed properly.
5.2
Changing the decorative plate (free-standing only)
➤ Proceed as shown (fig. 6, page 5 – fig. 9, page 5).
5.3
Fixing the minibar
Ventilation (fig. a, page 7)
• Ventilation must be provided as shown in alternatives A, B, C or D.
• Ventilation grills (1), if used, must have openings of at least 200 cm² each.
EN
Installation
15