Publicidad
Idiomas disponibles
Idiomas disponibles
AIR FLOW VELOCITY AND DIRECTION ADJUSTMENT
AIR FLOW velocity and direction can be selected
as required.
ON/OFF
WARM
FAN
I FEEL COOL
VANE
HEAT
DRY
MODE
WIDE VANE
LONG
RESET CLOCK
Get user manuals:
See SafeManuals.com
I
To change the AIR FLOW velocity, press
FAN
the
button.
Each time the button is pressed, the fan speed is
changed in sequence: (Low) → → → → →
→ → → → →
(AUTO)
•
Use the
(High) notch to cool/heat the room more.
•
If the operating sound of the air conditioner disturbs your
sleep, use the
(Low) notch.
I
To change the AIR FLOW blowing direc-
tion vertically, press the
˚C
Each time the button is pressed, the angle of the
CLOCK
HORIZONTAL VANE is changed in sequence: (1) → → → → →
AMPM
(2) → → → → → (3) → → → → → (4) → → → → → (5) → → → → →
AMPM
SWING OPERATION
TOO
TOO
COOL
Use the swing operation for the air flow to reach all cor-
ners of the room.
Recommended HORIZONTAL
VANE range
STOP
Use the
(AUTO) position usu-
ally.
Use position
(1) or
(2) in the
START
COOL or DRY mode and use posi-
tions (3) to (5) in the HEAT mode
when adjusting to your require-
HR.
ments.
MIN.
NOTE
I In the cooling operation, when the air conditioner is op-
erated with setting the HORIZONTAL VANE to
(5) for 1 hour, the AIR FLOW direction is automatically
set to horizontal to prevent condensed water from drop-
ping.
I Adjust the vertical AIR FLOW direction using the remote
controller. If the HORIZONTAL VANE is moved manually,
it may cause trouble.
I In the heating operation, if the air flow temperature is
too low or when defrosting is being done, the HORIZON-
TAL VANE position is set to
Auto air flow direction control operation
I When the AUTO mode is selected with the
(Med.) → → → → →
set to correspond to the operation mode for effective operation.
(High)
(1) HEAT
When the air flow temperature is
too low, the air is blown out hori-
zontally.
VANE
button.
(SWING) → → → → →
(AUTO)
I
To change the AIR FLOW blowing direction horizontally, press the
Each time the button is pressed, the angle of the VERTICAL VANE is changed in sequence:
→ → → → →
1
SWING OPERATION
COOL/
2
DRY
Use the swing operation for the air flow to reach all corners of the room.
3
4
HEAT
Horizontal AIR FLOW blowing range
5
(4) or
NOTE
Adjust the horizontal AIR FLOW direction using the remote controller. If the VERTICAL VANE is moved manu-
ally, it may cause trouble.
(1).
VANE
button, the position of the HORIZONTAL VANE is automatically
(2) COOL, DRY
When the air flow temperature rises,
The air is blown out horizontally.
the air is blown out downwards.
→ → → → →
→ → → → →
→ → → → →
(SWING) → → → → →
→ → → → →
About 100°
COOL/DRY
About 150°
HEAT
WIDE VANE
button.
9
Publicidad
