MyFridge MF1F
6
Technical description
The MyFridge thermoelectric bottle cooler MF1F is a compact cooler designed for mobile
use. It can cool drinks to around 22 °C under room temperature or warm them to around
60 °C.
Its cooling system is a non-wearing Peltier cooling system with the heat discharged by a
fan.
7
Installing the bottle cooler
!
WARNING!
When selecting the location for installing the appliance, ensure that
passengers cannot be injured under any circumstances.
When installing the appliance, make sure the airbag function is not impaired.
Do not attach the appliance in an area where passengers could knock their
heads against it.
Attach the device so that the bottles cannot roll into the footwell.
If you want to fasten the bottle cooler with a self-tapping screw
➤ Drill a hole where you want to fasten the appliance.
To prevent damage when drilling make sure there is sufficient space on the other side
for the drill head to come out.
➤ Deburr the hole.
➤ Screw the self-tapping screw (fig. 2 2, page 3) through the opening in the bottom of
the container.
If you want to fasten the bottle cooler with a machine bolt
➤ Drill a hole where you want to fasten the appliance.
To prevent damage when drilling make sure there is sufficient space on the other side
for the drill head to come out.
➤ Push the machine bolt (fig. 2 3, page 3) through the opening in the bottom of the
container and fasten the bottle cooler with both washers (fig. 2 4, page 3) and the
nut (fig. 2 5, page 3).
If you do not want to permanently fasten the bottle cooler
➤ If you do not want to permanently fasten the bottle cooler, put the dummy plug
(fig. 2 1, page 3) in the opening on the bottom of the container.
EN
Technical description
15