Celexon CinePop CP1000 Manual De Instrucciones página 13

INSTRUCTION
First, position the appliance near a power socket on a stable surface.
1. Set out the accessories: Popping corn, spices, bowl for the finished popcorn, oil,
measuring spoon, measuring cup, (Measuring spoon is included in the delivery).
2. Connect the appliance to the mains socket. Make sure that the appliance is switched
off.
3. Make sure that the kettle is correctly positioned in the holder.
4. Make sure that the plug is plugged into the kettle.
5. Switch on the appliance. Leave the appliance on for 3-5 minutes so that the kettle
is preheated.
6. Switch off the appliance.
7. Fill the oil measuring spoon 2/3 full with your favourite popcorn oil and then pour it
into the kettle. It is advisable to use a refined vegetable oil with a high smoke point
for best results.
8. Fill the grain measuring spoon 2/3 full with the popcorn corn and then add it to the
oil in the kettle and close it.
9. Switch the appliance back on and close the door. Fresh, hot popcorn will pop out of
the opening provided.
10. As soon as the kernels have stopped popping, tilt the kettle using the hand crank
on the side.
USEFUL TIPS
Smoke
• If your celexon CP1000 popcorn machine starts to smoke during
preparation, this may be caused by accumulated fat/grease. To
prevent this, clean the inside of the kettle after each use.
• When no popping sounds are heard for a period of 30 seconds,
switch off the appliance.
4