2
Paper / Credit Card Slot:
Make sure you do not
1
exceed sheet count per pass
(24 sheets max.). Insert
paper as straight as possible
into feed slot and release.
3
LED Status Indicators:
Bin full / Door open / Overload / Overheat / Power On
Power On:
The green LED light indicates the shredder is "On" and ready to
operate when paper is inserted.
Overheat:
The red LED light indicates the shredder has shredded continuously
beyond the maximum running time and is overheating; the unit will
automatically shut off. If this happens, switch the shredder off for
50 minutes or longer before resuming normal operation.
Auto Reverse Technology
When the shredder detects over-
capacity shredding, the motor
immediately stops and rejects paper
before actual shredding begins.
Insert one credit card at a
2
time into the middle of the
feed slot.
EN
7