Goodwe HK1000 Manual Del Usuario página 73

Quick Installation Guide V1.0 -2022 -09-05
07
Commissioning
Power ON
Step 1 Connect the HomeKit cables.
Step 2 Power on the inverter and make sure that the inverter is working normally. Then the
HomeKit is powered on.
Commissioning the HomeKit
Connect the HomeKit device to the router via WiFi or LAN. For details about setting related
parameters, refer to the Wi-Fi/LAN Kit Quick Installation Guide.
Indicators
Indicator Status
Steady on
Off
Blinking
Off
Double Blinking
Quadruple Blinking HomeKit is trying to connect to the server.
Steady on
Off
Reset Button
Press Time
1-3s
5s-10s
>15s
For more detailed instructions, scan the QR codes below.
Wi-Fi/LAN Kit Quick
Installation Guide
Description
Power on
Power off
The communication between HomeKit and the inverter is
normal.
No communication between HomeKit and the inverter.
HomeKit is trying to connect to the router.
HomeKit has been connected to the server successfully.
Parameters for connecting HomeKit to the router or the
server have not been set.
Description
Reset the HomeKit communication module.
Reset HomeKit configurations.
Initialize HomeKit and clear the historical energy data.
SEMS Portal User
Manual
71