Siemens SIMATIC NET SCALANCE XB-200 Manual De Configuración página 533

Índice alfabético
A
add log, 480
agent-priority, 422
alias, 70
no alias, 71
Ámbito de vigencia, 19
arp timeout, 329
no arp timeout, 330
authorized-manager, 441
no authorized-manager, 442
authorized-manager ip-source, 442
no authorized-manager ip-source, 444
auto-learn, 447
auto-save, 100
no auto-save, 100
B
base bridge mode, 154, 181
broadcast-block, 72
broadcast-priority, 423
Ch
channel-group, 189
no channel-group, 190
C
clear counters, 54
clear fault counter, 477
clear history, 40
clear hrp counters, 354
clear line vty, 54
clear logbook, 476
clear ring-redundancy manager counters, 355
clear screen, 34
clear spanning-tree counters, 200
clear spanning-tree detected protocols, 199
clear standby counter, 355
clear-all-static-unicast, 447
cli-console-timeout, 62
no cli-console-timeout, 63
SCALANCE XB-200/XP-200 Command Line Interface
Manual de configuración, 05/2016, C79000-G8978C361-02
Comandos CLI
símbolos de representación, 30
configure terminal, 55
coordinates height, 63
coordinates latitude, 64
coordinates longitude, 65
cos-map, 425
cos-remap, 426
cos-remap enable, 428
D
dcp forwarding, 251
dcp server, 249
no dcp server, 250
delete, 87
disable, 56
dot1x guest-vlan, 453, 456
no dot1x guest-vlan, 454, 457
dot1x guest-vlan reset, 459
dot1x guest-vlan vlan-id, 458
no dot1x guest-vlan vlan-id, 458
dot1x mac-auth, 455, 460
no dot1x mac-auth, 461
dot1x mac-auth port reset, 462
dot1x mac-auth vlan-assign, 462
no dot1x mac-auth vlan-assign, 463
dot1x port-control, 464
no dot1x port-control, 465
dot1x reauthentication, 466
no dot1x reauthentication, 466
dscp-map, 429
duplex, 73
no duplex, 74
E
enable, 57
ethernetip, 65
event config, 483
no event config, 485
events, 478
exit, 35
F
factoryclean, 117
533