Descargar Imprimir esta página

NEROXDOMO PRIME 3H Manual De Instalación página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

Basic settings
1. Remote control / Channel setting
If a Multichannel Remote control is used, choose the channel first
1.1
1.2
1"
Press SET
RED indicator light
for 1 sec.
will blink slowly
2. Changing curtain opening direction (only if needed)
2.1
2.2
5"
Press STOP for
RED indicator light
5 sec.
will blink slowly
Additional functions
3. Enable / disable Light Touch function (Light Touch function: the motor will run automatically by pulling 5 cm of the fabric.)
This function is enabled by default
3.1
3.2
7"
Press SET
RED indicator light
for 7 sec.
will blink slowly
4. Changing motor speed level
The motor has 3 speed levels. The highest speed level is selected by default
4.1
4.2
x3
3"
Press SPEED
BLUE indicator
for 3 sec.
light will blink 3
times
5. Setting Limit position
5.1
5.2
SET
Move until Limit to
Remove the cover
be adjusted
to have access to
button SET
6. Adding new Remote Control / Channel using a programmed one
6.1
6.2
5"
Press STOP for
RED indicator light
5 sec.
will blink slowly
www.neroxdomo.com
The time between operations must be lower than 10 seconds or the motor will leave the setting mode
1.3
1.4
x3
Press UP once
BLUE indicator
light will blink 3
times
2.3
2.4
x3
Press STOP once
BLUE indicator
light will blink 3
times
The time between operations must be lower than 10 seconds or the motor will leave the setting mode
3.3
x3
3"
RED indicator light
BLUE indicator
will blink quickly
light will blink 3
after 3 sec.
times after 7 sec.
BLUE indicator: 101-130RPM
PURPLE indicator: 81-100RPM
RED indicator: 50-80RPM
5.3
5.4
x3
1"
Press SET
BLUE indicator
for 1 sec.
light will blink 3
times
6.3
NEW
6.4
x3
Press UP in new
BLUE indicator
Remote Control /
light will blink 3
Channel
times
6 10
PRIME
3H &
1.5
REMOTE /
CHANNEL
added
2.5
OPENING
DIRECTION
changed
3.4
LIGHT TOUCH
function enabled/
disabled
4.3
4.4
3"
Press SET to
Press SPEED
change speed level
for 3 sec.
5.5
5.6
1"
Adjust until desired
Press SET
position (also
for 1 sec.
manually)
6.5
NEW REMOTE
CONTROL /
CHANNEL added
/
PRIME
5H
installation manual
4.5
4.6
x3
BLUE indicator
SPEED LEVEL
light will blink 3
set
times
5.7
5.8
x3
BLUE indicator
LIMIT POSITION
light will blink 3
set
times
5 YEARS WARRANTY
ENG

Publicidad

loading

Productos relacionados para NEROXDOMO PRIME 3H

Este manual también es adecuado para:

Prime 5h1565700015657002