JBM 54245 Manual De Instrucciones página 14

Options for fastening the structure to the
cylinder head
Option 1: Support with 4 feet
This option is used when there are no
screws aligned with the injectors.
Option 2: Support with 3 feet
This option must be used when the fixing
screws of the head are in line with the
injectors.
When possible, use this option because the
structure is stiffer and faster to position.
Option 1: Support with 4 feet – Assembly
Screw the support feet (D) to the lateral su-
pports (I).
Join together the lateral support with the cen-
tral support (L) using the sliding support (A).
Position the support on the cylinder head.
Adjust the position of the support feet so they
are aligned with the screws on the cylinder
head.
ATTENTION! Always place the feet supports in
the vicinity of the injector and never far away.
By doing this you can ensure more rigidity to
the structure and that the injector gets ex-
tracted completely perpendicular.
· 14 ·
REF.54245