Publicidad
Idiomas disponibles
Idiomas disponibles
No.3
No.4
MAINTENANCE
• Temperature limiter cut off electricity if water heater is overheated or thermostat damages.
Manual resetting is needed. Resetting knob is as follows (see Fig.9).
WARNING: Non-professionals are not allowed to disassemble temperature limiter to reset. Please
contact professionals to maintain. Otherwise, our company will not take responsibility if any quality
accident happens because of this.
• Check the power supply plug and socket frequently to make sure that they have good, reliable
contact and are well grounded without overheating phenomenon.
• If the heater is not used for a long time, especially in the regions with low atmospheric
temperature (lower than 0ºC), the water inside the heater shall be drained away. This will prevent
the damage to the heater due to water freezing in the inner container, (Refer Cautions in this
manual for the method to drain away the water from the inner container).
• In order to ensure that the water heater operates efficiently for a long time, it is recommended to
clean the inner container and the deposits on the electrical heating components periodically.
• It is recommended to examine the magnesium anode protection materials every six months or
so. If all the material has been consumed, please replace with the new material.
WARNING: Do cut off power supply before maintenance, to avoid danger like electric shock.
Temp:
*Increases temperature in 1°C increments.
*Max. temp. is 75°C.
*Decreases temperature in 1°C increments.
*Min. temp. is 30°C.
As the temp. is adjusted, the display " 6 " changes accordingly. When the temperature
adjustment is stopped, the value will return to the current outlet water temperature.
Only available in APP.
Set hot water READY in a certain period.
SMART cannot be executed in the mode of repeated appointments.
36
Publicidad
