Parkside PAS 10 A2 Manual De Instrucciones página 21

Idiomas disponibles

3561_2010_par_LED-Arbeitsstrahler_A6_content_OS.indd 25

This product's mains cable is non-replaceable. If the mains cable is

damaged, the product must be disposed of.

Avoid the risk of fatal injury

from electric shock

Check the product for damages before connecting it to the power

supply. Never use the product if it is damaged in any way.

Protect the mains cable from sharp edges, mechanical strain and

hot surfaces.

Only touch the insulated part of the mains plug when connecting

or disconnecting it from the mains supply!

Always unplug the mains plug from the socket before mounting,

removing or cleaning it.

Disconnect the product from the mains power if you are not using

it for long periods (e.g. when on holiday).

Never open any of the electrical equipment or insert any objects

into this equipment. Such interferences pose a risk of fatal injury

from electric shock.

Before use, ensure that the available mains voltage matches the

operating voltage required by the product (220–240 V∼, 50 Hz).

Never carry the product by the mains cable.

Lay the mains cable in such a way that nobody will step on or

trip over it.

Prevent fire and injury hazards

CAUTION! RISK OF BURNS DUE TO HOT SURFACES! To

prevent burns, make sure that the product has been switched off and

has cooled down before touching it. Illuminants become very hot.

Do not cover the product with any objects. Excessive heat can

result in fire.

GB/IE

24.03.21 11:3