Zeegma Zonder Pro Ash Manual De Usuario página 11

LIST OF PARTS (FIG. A)
1.
Handle
2.
On/off switch
3.
Inlet hole
4.
Outlet hole
5.
Upper body
6.
Metal clamps
7.
Metal tank
8.
Device base
9.
Wheels
10. Filter support
MOUNTING
1.
Insert a flexible hose into the inlet hole (fig. 1). Make sure it is
tightly attached.
2.
Attach the plastic tube and the selected nozzle to the hose
(fig. 2).
USE
1.
Place the filter support (10, fig. A) on the motor base.
2.
To use the vacuum cleaner to clean dust, dirt and other dry
debris, place the fabric filter (fig. 3) inside the vacuum cleaner
on the mouth of the inlet hole, and then place the HEPA filter
(fig. 4) on the filter support (10, fig. A).
3.
To use the vacuum cleaner to clean ash, insert the heat-resistant
filter (13, fig. A) into the device tank. Attach the aluminum crevice
nozzle (19, fig. A) to the hose.
4.
Secure the top cover by closing the metal clamps (6, fig. A).
The element A should be lifted up and the element B should
be lifted down (fig. 5).
5.
To use the vacuum cleaner in the blowing function, insert the
flexible hose into the outlet hole (4, fig. A).
6.
Connect the power cord to the power source, and then turn on
the vacuum cleaner by pressing the switch (2, fig. A).
11. HEPA filter
12. Fabric filter
13. Heat-resistant filter
14. Flexible heat-resistant hose
15. Plastic tube x3
16. Universal cap for floors
17. Adapter
18. Aluminum tube
19. Aluminum crevice nozzle
EN