Costway ES10197 Manual De Instrucciones página 5

• Temperature display for lower plate⑤:
* Power on indicates 000℃/32℉
* Temperature setting range 90-230℃/194℉-446℉
* After temperature is setting,light flashing three times to start
working
* In working condition,the light is normal on
• Heating display for upper plate⑥:
* Turn on power,the light is in white color, it is normal on
* When heating,light is in red color and starts to flashing
* When stop heating,light is in red color and normal on
• Heating display for lower plate⑦:
* Turn on power,the light is in white color, it is normal on
* When heating, light is in red color and starts to flashing
* When stop heating, light is in red color and normal on
• Timer control buttons⑧:
* Each touch increase/decrease one minute
* Long press continuous increase/decrease
* In working condition,the light is normal on
• Timer display⑨:
* Power on indicates 0:00
* Timer range from 1 minute to 4 hours.
* After timer is setting, countdown starts light flashing three times.
* Without setting timer, light is normal on
• Timer status display⑩:
* If countdown starts, light is normal on
* Without setting timer or timer is stopper, light is off
08
• Five auto mode buttons⑪:
Programmes Time(minutes)
Vegetables 8
Sausage 10
Fish 8
Chicken 7
Beef steak 8
* Without start auto mode, the light is in white color,it is normal on
* Press 3 seconds to turn on an auto mode,the light turns in green
color
* When an auto mode is on, you can increase/decrease time and/or
temperature according to own taste
* Press 3 seconds to turn off an auto mode if you want to stop it
BEFORE FIRST USE
• Read all instructions carefully and keep them for future reference.
• Remove all packaging
• Clean the Cooking Plates by wiping a sponge or cloth dampened in
warm water.
DO NOT IMMERSE THE UNIT AND DO NOT RUN WATER
DIRECTLY ONT THE COOKING SURFACES.
• Dry with a cloth or paper towel.
• For best results, lightly coat the cooking plates with a little cooking
oil or cooking spray.
Notice: When your Grill is heated for the first time, it may emit
slight smoke or odor. This is normal with many heating
appliances. This does not affect the safety of your appliance.
HOW TO USE
Insert the plug into the wall socket; There is a short beep sound,and
the power button will breathing flash
If manual mode has been selected, set a temperature for preheating.
Temperature
200℃/392℉
220℃/428℉
210℃/410℉
230℃/446℉
230℃/446℉
09