PRO LIFTS VMB TE-034 Manual De Instrucciones página 8

Quick operation guide
O R I G I N A L
4. USER INSTRUCTIONS.
4.1 - Place the lift on its working position,
in a fi rm, fl at surface. Remove the exten-
sible bar (EX-034B) from the leg.
4.2 - Firstly, untighten the screw (B) of the
bracket and put the extension bar (EX-
034B) in it, tighten the screw (B) again to
fi x the bar. Then remove the safety catch
pawl (R) of the support system (SA) and
untighten the retainer knob (K). Lower the
support system (SA) until you can fi x the
safety catch pawl (R) in the required posi-
tion, then tighten the knob (K).
4.3 - THE MAXIMUM LOAD IS 125 Kg
(275 lb). The lift should NEVER be over-
loaded (over 125 Kg). Safety at work is
the most important issue. Untighten the
steel bracket (B) and place the load onto
the lift using an adequate support accor-
ding to the need, use so that the weight
of the load will only elevate in a vertical
direction. The minimum load is 25 Kg.
4.4 - Elevation: Turn the winch crank
1
clockwise (N ) to lift the tower, the red
ALS lock enable the lift to rise and auto-
matically block the profi les whilst rising,
ensuring that it will never fall.
4.5 - Blocking: Once the system is ele-
vated to its required height gently turn the
PRO LIFTS S.L.
3.17 - Only original replacement parts should be used.
handle in a anti-clockwise (N
introduce the ALS locks in its correspon-
ding hole and block the profi les. The ALS
lock will take the pressure of the load and
release strain applied on the cable.
Security system ALS
The TE-034 incorporates the patented
security system ALS (Automatic Lock
Security). This VMB red trigger system
automatically blocks the tower in the posi-
tion it is left in. Each section of lift has an
ALS that blocks the section in the unlikely
event of the cable breaking.
4.6 - Lowering: To bring the lift down you
need to fi rst turn the winch handle slightly
clockwise (N
the red ALS lock out. This releases the
blocking systems. Then turn the handle
anti-clockwise (N
ALS lock pulled out until the profi le has
been completely lowered. All red ALS
locks should be pulled out one by one
whilst the handle is turned anti-clockwise
and the profi les are brought down, one by
one.
CAUTION
When two towers are used to elevate a
bridge, down truss or many towers to ele-
vate a structure of any type, it is almost
impossible that two or more people co-or-
Depósito legal y copyright 2014. Todos los derechos reservados.
ENGLISH
2
) direction to
1
) and at the same time pull
2
), whilst maintaining the
8