Tribit BTS11 Manual De Usuario página 5

EN
How to Charge the Speaker
Connect the other end of charging cable to a charging adapter and connect the
charging cable to the USB-C charging port on the Bluetooth speaker.
Note:
During charging, the indicator light is always on in red.
When the speaker is fully charged, the red indicator light goes off.
When using in wet or watery environment, please plug the silicone plug
tightly to avoid water in the charging port.
3
Button Control
1. On/Off
Power Button
Press Turn on
Press Turn off
Press and Forced
hold for 8s shutdown
Note: If the Tribit AquaEase Speaker is unable to be powered off due to unknown
reasons, you can forcibly turn it off by pressing and holding the power button for
8 seconds and then the speaker will re-start automatically.
EN
Status Indicator Light
• The status indicator light is always
on in blue.
• When the battery is low, the
status indicator will flash in red.
• During charging, the indicator is
always on in red.
• When the speaker is fully charged,
the red indicator light goes off.
All lights are off and the display
goes off.
All lights are off and the display
goes off.
4