HP Smart Tank 210 Serie Guía De Referencia página 5

2 Install printheads
1. Open the front door. Make sure the
print carriage has moved to the center;
if not, close the door for 15 seconds.
3. Remove and discard the orange guard.
Note: Keep the guard upright; handle
carefully to avoid ink leaks.
5. With the electric contacts facing inside,
insert the printheads and click into place.
Before installing printheads, ensure the following:
• The printer is on.
• All four ink tanks are filled.
2. Remove the orange tape from the
printhead cover.
Press and release the blue latch to
open the printhead cover.
4. Remove the orange cap and tape from both
printheads.
Caution: Do not touch the electric contacts
or print nozzles under the tape.
6. Close the printhead cover and the front door.
• You have closed the front door
for approximately 15 seconds
after filling ink.
5