Publicidad
Idiomas disponibles
Idiomas disponibles
EN
CARE ADVICE:
BLADE scooters are designed in such a way that they require minimal care. In order to prolong the use
of the scooter, pay attention to the following information:
1. Wheels: check the condition of the wheels before each use, to avoid excessive wear. Riding on
a scooter with worn wheels can be dangerous. Worn wheels should be replaced. When replacing the
wheels, it is recommended that you change the two wheels together with the bearings at the same
time.
2. Bearings: Clean the bearings of dirt and moisture after each use. In the case of rain, the bearings
must be cleaned with a dry cloth and lubricated. This will significantly increase the bearing life and
provide better wheel rotation during skating.
3. Shaft screws: always check if they are tight. The screws should always be clean and have no
signs of oxidation or corrosion.
4. Further details: all worn, cracked or broken parts must be replaced immediately. To purchase
original spare parts, consult your authorized dealer in your area or an authorized service center.
SCOOTER CLEANING
After each ride, it is recommended to clean all the details of the scooter with a damp cloth to remove
dirt and dust. Do not use commercial cleaners or solvents as they may damage the surface. Do not
use alcohol, alcohol or ammonia based cleaners, as they may damage or dissolve plastic parts and
labels. Store in a dry place, protected from dust and moisture. For transport as well as during stor-
age, it is recommended to use a special carrying bag (sold separately).
Wheels and bearings
Under normal conditions of use and care, the wheels and bearings require no maintenance. How-
ever, the duty of the owner periodically inspect the wheels and bearings. When detected wheel
wear or backlash of the wheel bearing, they must be replaced. The warranty does not cover wear
of wheels and backlash. Installation and use of non-original parts can affect your safety and void
your warranty.
8
WWW.BLADE-SPORT.EU
Publicidad
