Publicidad
RECEIVING AND TRANSMITTING
Setting the Channel
The channel is the frequency of the radio uses to transmit.
1. Press the 【 MENU/POWER 】 button until the channel number starts
to flash.
2. Press 【 ▲ 】 or 【 ▼ 】 button to change the channel number.
3. Press the PTT button to exit menu or 【 MENU/POWER 】 button to
continue setup.
Selecting the Interference Eliminator Code
Sub-Codes help minimize interference by blocking transmission from
unknown sources. Your radio has 121 Sub-Codes. To set the code for
a channel:
1. Press the 【 MENU/POWER 】 button until the code number starts to
flash.
2. Press 【 ▲ 】 or 【 ▼ 】 button to select code number.
3. Press the PTT button to exit menu or 【 MENU/POWER 】 button to
continue setup.
Setting and Transmitting Call Tones
Your radio can transmit different call tones to other radios in
your group when you pressed 【 CALL/MON 】 button. The radio has 5
call tones. To set a call tone:
1. Press 【 MENU/POWER 】 button until 'CA' appears. The current
call tone setting flash.
2. Press 【 ▲ 】 or 【 ▼ 】 button to change and listen to the call tone.
3. Press the PTT button to exit menu or 【 MENU/POWER 】 button to
continue setup.
VOX
Transmission is initiated by speaking into the microphone of the radio
instead of pushing the PTT button.
14
ENGLISH
Publicidad
