Proline CBE18 Manual Del Usuario página 62

The steam tube can be used to make hot water.
1. Open the top lid and fill the water tank with desired amount of water
according to the gauge inside.
Close the top lid.
2. Plug in the appliance. Make sure that the steam knob is at the OFF position.
3. Press
The appliance will be automatically turned off if no button is pressed within
25 minutes.
4. Press
out through steam tube and you can use hot water for drinking, washing or
heating the cup.
5. When you've finished making hot water, turn the steam knob back to the
OFF position and press
6. Press
1. Open the top lid. Fill carafe with drinking water to the level indicator relative
to the number of cups of coffee you want to prepare. Pour water into water
tank.
NOTE: The water level should not exceed MAX level as indicated on the
water level gauge inside the tank.
2. Place the nylon filter in the funnel.
3. Add proper amount of ground coffee into the filter, then close the top lid.
• Usually, a cup of coffee needs a level spoon of ground coffee, but you
may adjust according to personal taste.
4. Place carafe on the warming plate.
5. Plug in the appliance.
6. Press
• The drip coffee indicator light will illuminate on the display.
NOTE: The brewing operation can be interrupted by pressing
any time. The drip coffee indicator light will go out, indicating that the
drip coffee maker is turned off.
• During the brewing cycle, you can temporarily remove the glass carafe
to pour and serve a cup of hot coffee. The brewing cycle will pause
and no coffee will drip from the appliance. to restart the brewing cycle,
CBE18 IB OP JUN 1.indd 59
MAKING HOT WATER
and wait until the ready indicator light stops flashing.
and turn the steam knob anticlockwise, then the hot water comes
to stop working.
to turn off and unplug the appliance from the mains socket.
MAKING DRIP COFFEE
at
59
13/6/2022 3:19 PM