Ataller KS-2088 Manual De Instrucciones página 3

GB
3. Weighing Operation
3-1.Firstly put the scale on flat and hard surface, press ON/TARE button to start up the scale，
return to zero after full display.
3-2.Put the object on the scale，the LCD indicates the weight of the object, press TARE button.
3-3. Add another item to the scale, and you will get a reading of its weight regardless of
previously measured item. press the ON/TARE button to reset the scale to zero.
3-4. Take off all the objects, it indicates the actual negative weight, press
ON/TARE to return to zero.
4. Sign Tips
4-1. When the voltage of the battery get low it indicates below：
4-2. When the voltage of the battery get low and the scale fail to work, it indicates below.
4-3. Unstable zero indication：If the "unSt" symbol is displayed on the LCD screen, it means
that the weight on the scale is not stabilized, or that the scale is not placed on a hard, level and
flat surface. Place the scale on a flat stable surface and try again.
3