Matco Tools MCL1614HPID Instrucciones De Operación

ATORNILLADOR NEUMÁTICO DE ALTA POTENCIA HEXAGONAL SIN ESCOBILLAS 16V 1/4"
TOURNEVIS À PERCUSSION HEXAGONAL 1/4 PO GRANDE PUISSANCE SANS BALAIS 16V
1
HEX 16V LI-ION
HIGH POWER
4
IMPACT DRIVER
Operating Instructions • Warning Information • Parts Breakdown
Drive Size ............................................... ¼" Hex
Max Torque ......................................... 150 ft-lbs
Impact per minute ......................................3100
Free Speed ............................................. 0-2400
Overall length .............................................. 5.9"
Weight w/battery ..................................... 3.0 lbs
WARNING
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
ALWAYS WEAR
HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
MCL1614HPID
S P E C I F I C A T I O N S
Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicals known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
MCL1614HPID
Height w/battery .......................................... 9.0"
Battery Type .................................................16V
Charging time ................................< 40 minutes
Compatible Battery ..........................MCL1620LB
Compatible Charger .MCL16CHRG or MCLCHRG5
WARNING
Copyright © Professional Tool Products, 2017
1
MCL1614HPID
All rights reserved.
09/22/17