Mark MF 900 MK II Instrucciones De Usuario página 2

EN
1. Check first
When you get the machine, please open the package and inspect the machine. And make sure
all the parts are included for proper operation. If there is any damage caused by the transportation.
Shall you find any defects, please do not plug in the machine, make sure to contact your dealer.
The following parts should be included when the DF-V9C smoke machine shipped from the
factory.
One MF 900 MK II
One cable controller
One user manual
Safety Instruction
Please read the following instructions carefully, because it contains the important safety
information about the installation, using and maintenance of MF 900 MK II
1. Please keep the user manual for future reference, if you will sell the goods to other users; please
make sure that they have this user manual.
2. To make sure that you always connect the proper voltage, not higher than labeling or the voltage
in board -mounted controller.
3. This model only applies to the indoor places.
4. In order to prevent fires, and the risk of electric shock, don't put the machine under the rain or
damp places, to make sure the machine far from the combustible matter when it is working.
5. The machine must be installed in a ventilated place, and apart at least 50 cm from adjacent
objects. To ensure ducts not be blocked.
6. Before maintenance and replacing the fuse, please ensure that the power supply has been cut off,
and ensure that the replaced fuse is the same kind of fuse.
7. Please use safety chain when using stationary fixture to fixed device, moving the machine by
the matched handle not by the machine head.
8. The highest environmental temperature the machine suited is 40 ° C. Not operating the machine
over this temperature.
9. Please stop using when the machine have serious problem on operation. Don't try to repair it by
yourself. Not professional technical person to fix the machine will damage it. Please contact with
the local agent, and please note to use the same parts.
10. Don't connect the machine with control console.
11. Ensure the power cord don't be wrinkled or damaged.
12. Please don't pull or drag the power cord to cut the power off.
13. Any parts can not be fix by any not professional technical person, please don't try to open the
machine to fix it by yourself, if the machine has any problem and need to maintain, please contact
with the local agent.
PAG. 1
User Manual/Manual de Instrucciones MF 900 MK II