System Setup - PNI NS989 Manual De Usuario

EN
3. If you wish to copy all the files in the folder select the option "Select all". If you wish to copy only some files press ◄ button
on the remote to browse the files then press OK button to select the desired ones.
4. After selecting the desired files press COPY button again.
5. A new menu will appear on the screen where you can select the destination of the files, USB or SD card.
6. After you select the destination select NEXT to begin copying the files or BACK to return to the previous menu.
7. To cancel the copy function press the COPY button again.
ATTENTION: The copy function can't be used with original or audio type CD/DVD.
You can also copy files between USB and SD card. In addition you have the option to delete a file from USB or SD card
selecting the option "DELETE" from the menu after pressing the COPY button on the remote.
ATTENTION: Do not disconnect the USB memory or SD card during the copy process to avoid losing data and damaging the
memory device.
Repeat function
During audio or video playback you can select to repeat a chapter, a title or the entire disc/folder.
1. During CD/DVD playback press REPEAT button on the remote to repeat the current chapter. Press the button again to
repeat the title, and if you press the button a third time the device will repeat the entire disc. If you press the button a forth time
you will cancel the repeat function.
2. During USB/CARD playback press REPEAT button on the remote to repeat the curent file. Press the button again to repeat
the entire folder and if you press it a third time you will cancel the repeat function.
Zoom function
When playing video or image files you can press the ZOOM button on the remote to zoom in the image. Press the button
again to enlarge further.
Pressing the button for the forth time the image will zoom out. Press it repeatedly and the image will return to normal status.
NOTE: when the image is enlarged you can use ◄▲▼► button to move it on the screen.

SYSTEM SETUP

Press the SETUP button, on the device or remote control, to access the settings
menu of the device.
The General Setup Page looks like the adjacent image.
Use ◄► button to select a setup menu, the ▲▼ button to browse through the
settings and the OK button to select an option.
TV Display:
Set display ration.
This option depends on the image source or the TV you wish to use.
Angle Mark:
This function allows you to view a scene from multiple angles if the video file
allows it.
Default is ON.
OSD Language:
Select desired language for the menu.
Captions:
Select subtitle on/off.
Default is OFF.
4